Transmission Assembly

SAFETY FIRST: Protective gloves and eyewear are recommended at this point.

Assembly

Slide on the C4 gear so that its shift fork grove side faces the output end of the countershaft.

Slide the thrust washer and C1 bearing onto the countershaft

Fit the C1 gear over the bearing so that its slots face towards the C4 gear.

Assemble the crankcases. See the Crankcase assembly topic for more information.

- - - To Continue Reading, Subscribe Now - - -

This is an abridged sample manual from Cyclepedia Press LLC.

See more at - http://www.cyclepedia.com/online-manuals/

Note: If you are viewing this document offline be sure to visit the latest version online at http://www.cyclepedia.com before attempting any repairs. Updates are made without notice.